ComAp - InteliVision 5

InteliVision 5

Order code: INTELIVISION 5

New version of this product is also available. Check out its successor, InteliVision 5.2

InteliVision 5 is an easy-to-use industrial operator panel with a colour screen for monitoring of single gen-set for various applications. This robust and intuitive plug&play solution provides comprehensive visual overview of all engine data, monitoring information and trend history.

Intuitive navigation
Robust design
Simple installation & configuration
Colour screen
Comprehensive data overview
Plug&play solution

InteliVision-5-Datasheet

English (25 Jan 2023)

German 25 Jan 2023

English 25 Jan 2023

Czech 25 Jan 2023

Manuals

5 files

English (25 Jan 2023)

Certifications

2 files

English (25 Jan 2023)

EU Declaration of Conformity-Displays

English (27 Nov 2023)

Brochures

2 files

English (25 Jan 2023)

Display with a Difference Brochure

English (25 Jan 2023)

CAD drawings

2 files

English (25 Jan 2023)

English (6 Dec 2023)

Show resource hub for this product

Overview
Related products

Overview
Related products

The InteliVision 5 display is an intuitive and simple plug&play solution, ensuring comprehensive overview of all the data you require to monitor the operations of your gen-sets on a daily basis. The display is easy to configure and work with, including the configuration and trends monitoring of all parameters that are being monitored. This display is intended for connecting only with a single controller.

The InteliVision 5 offers:

Plug&play operations with auto-configuration based on specific application
Local and remote access for single controller monitoring
Option to configure all controlled parameters according to your requirements
Direct connection to the controller
5,7" colour screen TFT display with 320 × 240 pixels screen resolution
Easy screen customisation using a graphical editor
Five active buttons ensuring fast access to all important data
Fast and intuitive navigation
Integrated and easy-to-use mounting system, option to mount a controller to the rear side of the display
Broad operating temperature range from -30°C to +70°C; or from - 40°C if the device is power on above - 30°C
Front face is sealed to IP65
Communication available via RS-485 (galvanically separated)
The display has the same shape and cut out as the InteliGen NT controller
Compatible with the following ComAp controllers:

For a complete list of all compatible controllers, see the DataSheet/Global Guide.

Related products

InteliVision 8

InteliVision 8, industrial operator panel equipped with 8” colour screen, is designed to support the monitoring and control of single gen-sets’ operations for various applications. A simple and easy-to-use plug&play solution, it provides comprehensive overview of all engine data, monitoring information and trend history. The InteliVision 8 is intended for the ComAp InteliGen NT, InteSys NT, InteliMains and InteliDrive family of controllers.

InteliVision 18Touch

Get a comprehensive overview of your complex operations for any application with the InteliVision 18Touch remote display. Easy to install, configure and use, this 18,5“colour touchscreen display unit will support the control and monitoring of sites with multiple controllers and complex installations, such as CHP or Hybrid that have a large number of values that need to be measured. The InteliVision 18Touch comes with embedded PC Scada software enabling users to freely configure their screen with different types of items such as meters, bar graphs, numeric values, control buttons, pictures, etc.

InteliVision 12Touch

Intuitive, easy-to-use and simple to configure, the InteliVision 12Touch is an industrial operator panel equipped with 12.1” colour, multi-touch screen. Compatible with the majority of ComAp’s controllers, it provides comprehensive visual overview to monitor and control single gen-sets for various applications.

InteliVision 5 CAN

InteliVision 5 CAN is an easy-to-use industrial operator panel equipped with 5,7” colour screen for monitoring of single gen-sets for various applications. This intuitive plug&play solution with a CAN bus interface provides comprehensive visual overview of all engine data and monitoring information on a colourful display. The display has a robust and resilient design and can be used without any problems in environments with extreme conditions.

Accessories

InteliSys NTC BaseBox

InteliSys NTC BaseBox is a controller with a broad range of communication and PLC capabilities for single or multiple gen-sets operating in stand-by or parallel mode. Intended primarily for CHP and switchgear applications, it will help you with secure on-site and remote monitoring of various installations such micro CHP, datacentres, hospitals or banks.

InteliSys Gas

InteliSys Gas is designed to control, monitor and protect the operation of any type of gas engine and/or CHP (combined heat and power) unit. The control unit has broad communication capabilities, numerous specialised predefined functions for gas/CHP/generators; and it offers complete preprogramed control of the generating set, helping you save time with the configuration, commissioning and management of your project.

InteliGen NTC BaseBox

InteliGen NTC BaseBox is a controller with a broad range of communication capabilities for single or multiple diesel gen-sets operating in stand-by or parallel mode. Intended primarily for switchgear applications, this controller will ensure secure on-site and remote monitoring of your critical infrastructure installations such as datacentres, hospitals or banks. The InteliGen NTC BaseBox is one of the earlier versions of our advanced controller InteliGen 1000.

InteliMains NTC BaseBox

InteliMains NTC BaseBox is a Mains/Utility/Tie-breaker protection and supervision controller with extensive communication capabilities. Acting as a Mains protection relay, the InteliMains NTC BaseBox synchronises sets of gen-sets to the Mains/Utility source. This product is an earlier generation of the InteliMains 1010 controller and it is intended for switchgear applications and complex, critical infrastructure installations, such as datacentres, hospitals or banks.

InteliGen GSC

InteliGen GSC is a controller for single or multiple diesel gen-sets operating in stand-by or parallel mode. Intended primarily for switchgear applications, this product controls, monitors and protects critical infrastructure installations such as datacentres, hospitals or banks. The InteliGen GSC is an earlier generation of our advanced controller InteliGen 1000.

InteliSys NTC Hybrid

InteliSys NTC Hybrid is a controller for hybrid microgrid applications, supporting the combination of renewable energy sources with gen-sets. The controller can be used for both on-grid and off-grid applications to help optimise the use of renewable energy and reduce your carbon footprint.

InteliGen NT BaseBox

InteliGen NT BaseBox is a controller for single or multiple diesel gen-sets operating in stand-by or parallel mode. Intended primarily for switchgear applications, this controller will ensure secure remote monitoring of your critical infrastructure installations such as datacentres, hospitals or banks. The InteliGen NT BaseBox is an earlier generation controller of our advanced InteliGen 1000.

InteliGen GSC-C

InteliGen GSC-C is a controller with broad communication capabilities for single or multiple diesel gen-sets operating in stand-by or parallel mode. Intended primarily for switchgear applications, this product controls, monitors and protects critical infrastructure installations such as datacentres, hospitals or banks. The InteliGen GSC-C is an earlier generation of our advanced controller InteliGen 1000.

Substitute of

InteliVision 5.2

InteliVision 5.2 is an easy-to-use remote colour display for ComAp controllers, for monitoring and control of single gen-set for various applications. This intuitive plug&play solution provides comprehensive visual overview of all engine data, monitoring information and trend history.

Related case studies

Case Studies

Control System for a Cardboard Manufacturer

Case Studies

Propulsion Control for a Fishery Vessel

Case Studies

Empowering the Dutch Marine Market

Local support you can count on

Your operations depend on everything running smoothly. Our experts are here to make sure of that. We offer:

24-hour support on working days
Local contacts in 179 countries
Remote and in-person trainings and a range of support materials
Expert consultation, troubleshooting, and much more

Contact Technical support

Contact your local ComAp representative

Didn't find what you were looking for? Contact us, we’ll be happy to answer any questions you may have and help you with your business needs.

See Local Contacts

Interested in another country? Find your local representative.

Alternative products

InteliVision 12Touch

InteliVision 8

InteliVision 8 Marine

InteliVision 8 Marine is an industrial operator panel equipped with 8” colour screen, certified for use in the marine industry to support the monitoring and control of single gen-sets’ operations. A simple and easy-to-use plug&play solution, it provides comprehensive overview of all engine data, monitoring information and trend history. The InteliVision 8 Marine is intended for the ComAp InteliGen NT, InteSys NT, and InteliDrive family of controllers.

Our website uses cookies and similar technologies to provide you the best experience and to understand how you use our site.

You may either „Accept all“ by which you agree with using functional, analytical and marketing cookies. By pressing „Revoke“ only necessary cookies shall be allowed to enable the website and applications function correctly. To revoke your consent you can do it from footer menu in Change cookie preferences section.

You can find more information on the Cookie page and the Privacy section .

InteliVision 5

Related products

Accessories

Substitute of

Related case studies

Local support you can count on

Contact your local ComAp representative

Alternative products

You need an account to access this content