InteliGenNT GeCon / InteliSysNT GeCon
Generator Controller for Marine and Land-based Applications
- Separate generator controller for parallel operation with interface to engine controller
- InteliGen NT GeCon / InteliSys NT GeCon is a special firmware supported by following controllers:
- The marine certified InteliGen NT Marine or InteliSys NT Marine controllers for marine applications
- The standard InteliGen NT or InteliSys NT controllers for land-based applications - IG-NT/IS-NT GeCon firmware requires IGS-NT-GECON-PCM or IGS-NT-GECON-LSM+PMS dongles
- Marine approved by ABS, DNV, GL, NKK, RINA and Russian Maritime registers
Typical applications:
- Generator control with Master and Hot-standby controllers
- Generator control with independent Protection and Master controllers
For more information, see the IG-NT/IS-NT GeCon Datasheet or Marine Application Brochure.
Also see other features below:
- Automatic synchronization, Load-sharing, Power management, Heavy consumers blocking, Tripping of non-essential consumers...
- Support of complex bus configurations with bus-ties and multiple mains feeders
- Configurable Inputs and Outputs
- Modem, GSM, ISDN, Ethernet, Modbus interface
- Integrated PLC functions: AND, OR, RS, Comparators, Delays, PID loops, Math functions...
- Both monitoring and configuration (including PLC Editor ) PC software for free
- Integrated electric protections - default:
- 3-phase over-under frequency: ANSI 81H,81L
- IDMT, time overcurrent: ANSI 51 - Integrated electric protections - configurable:
- 3-phase over-under voltage: ANSI 59,27
- Overload and reverse-power: ANSI 32,32L
- Others: ANSI 51N,64,46,47,...
Datasheets
| Name | |||||
|---|---|---|---|---|---|
| IG/IS-NT GeCon Datasheet | 2.22 MB |
|
15.07.09 | ||
| World of Marine & Offshore Brochure | 8.84 MB |
|
22.11.11 | ||
| World of Marine & Offshore Brochure | 13.83 MB |
|
30.08.10 | ||
| Product Guide - Power Generation Applications | 7.05 MB |
|
15.12.11 | ||
| Product Guide - Power Generation Controllers | 7.81 MB |
|
15.12.11 | ||
| IG/IS-NT GeCon Datasheet | 3.26 MB |
|
19.08.09 | ||
| Control Systems Product Overview | 2.80 MB |
|
18.11.09 |
Manuals
| Name | |||||
|---|---|---|---|---|---|
| IGS-NT-GeCon 2.1.1 New Features | 25.02 kB |
|
01.03.12 | ||
| IG-NT-GeCon Operator Guide | 187.36 kB |
|
17.02.09 | ||
| IGS-NT-GeCon MINT 1.9 Reference Guide | 943.10 kB |
|
10.08.10 | ||
| IGS-NT-GeCon-SPI 1.9 Reference Guide | 991.19 kB |
|
17.08.09 | ||
| IGS-NT-GeCon SPtM 1.9 Reference Guide | 713.88 kB |
|
20.08.09 | ||
| Controller Battery Exchange Process | 1.40 MB |
|
08.08.08 |
Software and Firmware
| Name | |||||
|---|---|---|---|---|---|
| IGS-NT-GeCon 2.1.1 Upgrade Package | ZIP | 1.84 MB |
|
01.03.12 |
Certificates
| Name | |||||
|---|---|---|---|---|---|
| IG-NT Conformity Declaration | 183.08 kB |
|
13.07.10 |
